Prevents electrical fires, instead of just alarming about them
Why install a device that only gives out an alarm when smoke is present in the room.
Innohome SSA is a smoke alarm with a power safety cut-off function which prevents the electrical fire before it even starts.
Homes are equipped with all kinds of electrical devices which can start a fire.
Innohome SSA detects a device causing smoke and cuts the electricity to it and this way prevents the fire before flames occur or smoke causes significant harm to the home.
Innohome SSA is a praised and an internationally awarded Finnish innovation, which prevents electrical fires already when smoke appears. The reaction caused by smoke is the release of the residual-current device, which cuts off the electrical current and therefore prevents the electrical fire from starting.
Typical for electric fires is that the defected device generates smoke several minutes before the fire properly ignites. Innohome SSA prevents electric fire before flames appear and stops toxic gases from forming.
Mains powered fire alarms are recommended in many countries and mandatory for example for new homes in Finland. A basic smoke- or fire alarm is not of much use if no one is present to hear it or can do anything about the fire. Innohome SSA gives out an alarm of the danger but also prevents the flames by cutting off electricity to the smoking device.
Innohome SSA
Innohome SSA is a smoke alarm with safety power cut-off function.
Alarm unit type
Optical
Loud alarm signal
85 dB
Voltage
230 VAC, 50 Hz
Consumption in standby mode
Max. 5mA
Consumption when alarming
max. 50mA
Storage temperature
-25 - +60 C
Operating temperature
+5 - +40 C
Product dimensions (diameter)
122 mm (142 mm with mounting plate)
Product dimensions (height)
46 mm (alarm unit 41 mm + mounting plate 5 mm)
Standard wiring
3 x 1,5 – 2,5 mm2
Installation
Installation and system design can be done only by professionals. Please contact us for more information. Consumers are not allowed to install the product individually.
Innohome SSA is compatible with all houses but requires wiring.
NOTE: Some installation positions include parts that are purchased separately. Ask from your dealer.
Use
Innohome SSA brings fire safety to homes and holiday houses.
Each space, where electrical devices are being used is in the danger of suffering an electrical fire. Typical devices causing electrical fires at homes are stoves, lighting, washing machines and dryers, dishwashers, chargers and small kitchen appliances.
FUNCTIONALITY:
- Alarms when it detects smoke.
- Creates a residual fault current load from alarm signal.
- Cuts off electricity from the faulty device connected to the residual current device before flames. Thus stopping the formation of toxic gases.
- Electricity is quickly turned on again by lifting the fault current protections switch back up.
- Ready to use straight after installation – No action from user needed.
- Can be interlinked with other Innohome SSA -devices.
- Simple and cost-effective way of preventing electrical fires, and the damages caused by smoke and flames.
Find reseller
Innohome SSA resellers are extending all the time. Find the closest reseller from our Sales & Installation-page.
Find installer
Innohome SSA can be installed by any professional electrical installer. We have also collected a list of installers who are familiar with the product and have installed them before.
