The easy and effective way to reduce house fires
Internationally acclaimed Innohome Stove Guard SGK5010 reacts to a danger situation earlier than any other safety device without causing nuisance false alarms. Innohome Stove Guard SGK5010 is compatible with all electric cookers.
Almost all house fires could be prevented with a Innohome Stove Guard SGK5010. Every day multiple kitchen fires require the fire departments to come extinguish them. Many more fires are put out by the occupants themselves. Even the smallest fires cause at least nuisance of smoke, not to mention the fatal ones destroying the lives of many. Keep your family, home and property safe with a Innohome Stove Guard SGK5010.
There are over 400.000 Innohome Stove Guards installed to protect kitchens around the world. They have also been the first ones fulfilling the requirements of the European stoveguard standard EN 50615. Innohome Stove Guard SGK5010 is the current model from Innohome.
Innohome Stove Guard SGK5010
Innohome Stove Guard adapts to different cooking styles. The heat sensor’s sleek design fits well to it’s surroundings whether located on the cooker hood, wall or ceiling.
80 dB(A)
maximum alarm signal (1m)
<1 W
extremely low energy use
Tested
for electrical safety
Wireless communication
Short Range device
Factory paired
Ready to use
230 VAC
voltage
Automatic
fault diagnosis
Flame retardant
and high heat resistant plastics
130 x 130 x 30 mm
control unit dimensions (l x w x h)
90 x 37 x 13 mm
heat sensor dimensions (l x w x h)
Patented technology
EN 50615
Fulfils the European Stove Guard standard requirements.
Installation
Innohome Stove Guard SGK5010 comes with comprehensive and easy installation options.
The product consists of a heat sensor, a control unit and an installation kit. Depending on the location it can be a plug-and-play version or easily installed by an installer.
Stove Guard’s intelligent and wireless heat sensor is attached underneath the cooker hood with adhesive and uses a button cell for power. The heat sensor can also be installed on the wall or the ceiling. The control unit is connected to the power supply of the cooker and installed out of sight.
Installation can be done only by the professional installer (other than plug&play -version’s). Usually the installation takes around 1 hour of time. Please contact your local installer and agree about the installation. Consumers are not allowed to install the product individually.
Innohome Stove Guard SGK5010 is compatible with all electric cookers.
NOTE: Some installation positions include parts that are purchased separately. Ask from your dealer.
Use
Innohome Stove Guard SGK5010 is easy to use. The product measures the temperature from the stove and gives a pre-alarm in case of a potentially dangerous situation. If the warning is not acknowledged, the Innohome Stove Guard SGK5010 alarms and cuts off the power to the cooker. When the cooker has cooled down to a safe temperature, it is ready to be used again.
The device works silently in the background and can also be used easily by special user groups. It adjusts its sensitivity level based on the kitchen and user’s cooking styles, so that false alarms do not disturb the cooking.
It acts before flames appear. Normal smoke and fire detectors are not recommended to be used in the kitchen. They are only able to alarm the user, not to prevent a fire and would often give false alarms because of cooking fumes. Innohome Stove Guard SGK5010 acts before flames are formed and prevents fires also when you are not present or are otherwise unable to switch the power off.
Distributors and dealers
Innohome Stove Guard SGK5010 resellers are extending all the time. Find the latest information from our Distributors-page.
Installers
Innohome Stove Guard SGK5010 installers are extending all the time. Find the latest information from here.
